Flexem FE6100M

Display: 10.1” 16:9 TFT LCD

Resolution: 1024×600

Enclosure Material: Aluminum alloy

Cutout Dimensions: 260mm×202mm

Flexem FE6100M IoT HMI, featuring a 10.1" resistive touchscreen, gray metal enclosure, high-definition high-brightness full-view display, 1024x600 resolution, 24-bit colors, high-performance CPU, 4GB storage, 1 Ethernet port, IoT module supported, provides a plug-and-play touchscreen connectivity solution.

Hardware

Display
10.1” 16:9 TFT LCD
LCD Viewing
85'/85'/85'/85'
Resolution
1024×600
Colors
24-bit
Brightness
400 cd/m²
Touch Panel
4-wire industrial resistive touchscreen
CPU
600MHz ARM Cortex-A8
Memory
128M Flash + 128M DDR3
Ethernet Port
1* 10M/100M self-adaptive
USB Port
1* USB slave 2.0 port, 1* USB host 2.0 port
Downloads Method
USB slave / Flash drive / Ethernet
Serial Port
COM1: RS232/RS485/RS422; COM2: RS485/RS422; COM3: RS232

Electrical

Rated Power
< 10W
Rated Voltage
DC24V, operational range: DC 9V~28V
Power Protection
Lightning surge protection
Power Interruption Tolerance
< 5mS
Certification
EN61000-6-2:2005 and EN61000-6-4:2007 standards certified; RoHS certified; lightning surge ± 1 kV, group pulse ± 2 kV; electrostatic contact 4 kV, air discharge 8 kV

Environmental

Operating Temperature
-10~60℃
Storage Temperature
-20~70℃
UV Resistance
Operating in high UV environment is prohibited (e.g., in direct sunlight)
Environmental Humidity
10~90%RH (non-condensing)
Vibration Endurance
10~25Hz (X/Y/Z direction 2G/30 minutes)
Cooling Method
Natural air cooling

Mechanical

Protection Level
Front: IP65 (with flush panel cabinet installation), Rear: IP20
Enclosure Material
Aluminum alloy
Cutout Dimensions
260mm×202mm
Dimensions
274mm×214mm×39mm
Weight
Around 1450g